Table of Contents
Advertisement
Saving the settings into a System Setup File
When the adjustments have been completed, press "Ok" and the GLM.SE™ asks if the new settings
should be saved in the currently open System Setup File. If "Yes" is pressed, the newly edited settings
are saved, "No" discards the changes and "Cancel" returns back to the Acoustical Setup window so more
changes can be made.
Using the Interactive Response Editor
This tool is available once AutoCal™ has been run. AutoCal™ measures the acoustical frequency
responses of all the loudspeakers and subwoofers on the GLM.SE™ Control Network. The Interactive
Response Editor allows the user to:
•
See the frequency response measured using AutoCal™.
•
Immediately see the effect of adjusting the Acoustical Settings on the in-room frequency
response
To enter the Interactive Response Editor:
•
AutoCal™ must have previously run and been saved in the Setup to acquire a measurement of
the in-room frequency response of the loudspeakers and subwoofers on the GLM.SE™ Control
Network (this enables the Interactive Response Editor).
•
Enter the GLM.SE™ System Setup by pressing the "GLM.SE™ System Setup" button in the main
window. Then select a loudspeaker to be adjusted and click the "Edit Acoustical Settings"
button.
•
Below the frequency response graph is a button labeled "Interactive Response Editor".
Pressing this opens a new window that displays the acoustical response measured by AutoCal™.
It also shows how the current Acoustical Settings modify the measured response.
Moving the focus back to the Acoustical Settings Editor window allows the Acoustical Settings to be
changed. The effect of any changes can be seen in the responses displayed in the Interactive Response
Editor window. This tool makes it very easy to implement precise and controlled adjustment to a
loudspeaker's or subwoofer's acoustical response. Remaining problems in the response can be identified
and evaluated.
89
Advertisement
Table of Contents
