Table of Contents
Advertisement
Signal Format
The SE7261A subwoofer only accepts AES audio in the single wire mode. This mode carries two channels
of audio in each cable. Audio sample rates can be from 32 kHz to 200 kHz. Audio word length can be from
16 to 24 bits.
Audio Cable Definition
The GLM.SE™ has no way of knowing how many audio cables there are in the system and how digital
audio channels have been assigned in each cable. Describing the system is done using the Audio Cable
Definition window.
This window defines how audio cables are connected to the system. Descriptive names can be given to
the audio channels carried by each cable. Define the type of audio in these channel(s) as either a Main
Channel (full bandwidth audio) or an LFE Channel (band-limited audio channel).
After completing the description of an audio cable, create more audio cables by clicking the Create New
Cable button. Keep creating new cables until descriptions for all audio cables in the system have been
created. Up to four cables can be created. If too many audio cables are accidentally created, there is
107
Advertisement
Table of Contents
