Genelec Loudspeaker Manager Glm.se; Overview - Genelec SE Operating Manual

GENELEC LOUDSPEAKER MANAGER GLM.SE™

Overview

The Genelec Loudspeaker Manager GLM.SE™ is the control software for Genelec DSP loudspeaker
systems. The GLM.SE™ runs on a personal computer.
The GLM.SE™ knows when an SE7261A subwoofer is present on the control network and provides
access to all settings and system level controls.
The GLM.SE™ connects solely to a single SE7261A and offers control of everything within the subwoofer's
DSP. This includes controls built into the high and low pass outputs as well as full system controls including
monitoring volume, mute/solo for audio channels, audio channel Group selection and more.
All settings can be collectively stored into the computer as a System Setup File. Loading a System
Setup File recalls all system level settings and sets all settings for all loudspeakers, including acoustic
calibration.
Using the GLM.SE™, all acoustic settings can also be stored into the SE7261A for stand-alone use.
The basic structure of a GLM.SE™ Control Network has the following components
• Computer running the GLM.SE™ software.
• One USB port of the computer connected to the Network Interface.
• The Network Interface.
• Network cable connected to the SE7261A subwoofer.
GLM.SE™ software communicates only with the SE7261A subwoofer. All digital signal processing
controlled by GLM.SE™ software is contained in the SE7261A.
26