Advertisement
Advertisement
Table of Contents
Related Manuals for Genelec S30D
Summary of Contents for Genelec S30D
- Page 1 Genelec S30D Operating Digital Monitoring System Manual...
- Page 2 (or analog) input signal, making the a 24 liters (0.85 cu.ft.) vented cabi- low distortion amplifiers are capable S30D very easy to set up and use. net. The woofer has a very large mag- of driving a stereo system to peak...
- Page 3 S30D's digital input connector! Connect the digital signal cable to the "DIGITAL INPUT" female XLR con- nector on a S30D (see figure 2). Next connect a second signal cable from speaker's "DIGITAL THRU" male XLR connector to the "DIGITAL INPUT"...
-
Page 4: Monitor Placement
When the S30D detects a digital signal it switches automatically to the digital input, and the mode LED turns yellow. The S30D will switch back to the analog input if significant errors are detected in the digital audio or the digital signal is not present. -
Page 5: T Oubleshooting
60° 60k 70k 80k 100k Figure 8. Horizontal directivity characteristics and power Figure 9. The on-axis free field response of the S30D between response of S30D in its vertical configuration measured at 1m in 10 and 100 kHz. free field. -
Page 6: Amplifier Section
Order Code 1010-405-V/H* Amplifier system distortion at nominal output: Grille Order Code 1010-409 <0.05% SMPTE-IM <0.05% *V=Vertical (for S30D V), H=Horizontal (for S30D H) CCIF-IM <0.05% DIM 100 <0.05% Signal to Noise ratio, referred to full output: Bass >100 dB Midrange >100 dB...
Need help?
Do you have a question about the S30D and is the answer not in the manual?
Questions and answers