Table of Contents
Advertisement
GLM.SE™ Rapid Cabling Presets
The Rapid Cabling Presets help speed up the System Setup by quick identification of the speakers and
reduced text entries. The most common loudspeaker setups seen in listening rooms have been included
with the Rapid Cabling Presets.
Table of Rapid Cabling Presets
Type of signal
AES/EBU single-wire
AES/EBU single-wire
AES/EBU single-wire
AES/EBU single-wire
Here is a brief list of instructions on how to complete the Rapid Cabling Wizard.
•
Before starting the GLM.SE™, identify in the Rapid Cabling Preset Table shown above, the
description that matches the desired loudspeaker setup. Then, find the corresponding section
below and study the cabling layout description and the AES sub-frame assignment table.
•
At the sound source (mixing console, audio workstation, etc.) assign audio signals to the
AES/EBU outputs according to the table provided in each Rapid Cabling System Description.
•
Connect audio cables according to the description and the cable wiring diagram in the Rapid
Cabling System Description. BE SURE TO MANUALLY SWITCH EITHER CHANNEL A OR B
ON THE BACK OF EACH 8130A ACCORDING TO WHATEVER SUB-FRAME OF AES AUDIO
YOU WISH THAT SPEAKER TO REPRODUCE.
•
Connect the GLM.SE™ Control Network cabling.
•
Start the GLM.SE™ and proceed to the System Setup Wizard. Select the Rapid Cabling
Wizard. Then select the Rapid Cabling System Preset in the drop-down box.
•
If the system is properly connected and loudspeakers turned on, an ID Tone is briefly turned on
from output 1A. In all cases of rapid cabling, this should be the Left 8130A. Once the match is
confirmed press "Next". Repeat the procedure until all the 8130As have been identified.
•
Press "Next". The System Audio Connections page is shown. This provides a list of audio
Audio channel
Rapid cabling option
layout
2.0
Stereo Pair with Subwoofer
5.1
5.1 Surround System with
Subwoofer
6.1
6.1 Surround System with
Subwoofer
7.1
7.1 Surround System with
Subwoofer
Support for LFE channel
No
Yes
Yes
Yes
33
Advertisement
Table of Contents
