Back Up Lcd Touch Panel Firmware - Agilent Technologies Medalist i3070 5i Series Manual

6 Press OK when completed. Remove the SD card and press ESC to return

Back Up LCD Touch Panel Firmware

1 Open the Zone 2 door. Insert the SD card into the card slot.
2 On the Setting Mode page, press Manual to switch to Automatic mode.
3 To back up the firmware, select GT → SD.
4 Enter a filename for the backup and press ENT.
5 Press OK to confirm.
6 When the backup is completed, press OK. Remove the SD card and
8-6
to the Main menu.
press ESC to return to the Main menu.
Firmware Update
i3070 Series 5i Help