Ring Tone Patterns - Aastra AastraLink Pro 160 Administrator's Manual

AastraLink Pro 160 Administrator Guide
Configuring User Groups
Parameter
Transfer to
Transfer Number
Group Membership

Ring Tone Patterns

In IP Telephony, different ringing patterns have different frequencies and
cadences. Ring cadence is the ringing pattern heard by the called party, before
they pick up the call. The IP phones use the following Bellcore-specified tones by
default:
Ring Tone Pattern
3-18
Description
Specifies where the incoming call is transferred to if
there is no answer or if there is a busy signal on the
User Group's phones. Valid values are:
• None (default)
• Extension
• Voicemail
• Auto-Attendant
Note: If you choose extension, you must specify the
extension at the "Transfer Number" parameter.
Specifies the phone number or extension to transfer
unanswered incoming calls to. Valid values are the
registered phones with their extensions in your
AastraLink Pro 160 network.
Specifies the members of the User Group with their
extensions. Only the members selected become part
of the User Group you define. Default is NO
MEMBERS.
Call Criteria
internal calls
external calls
calls with contact list
calls with specific time frames
Bellcore Tones
Bellcore-dr2
Bellcore-dr3
Bellcore-dr4
Bellcore-dr5
41-001190-01 Rel. 1.1, Rev. 00