Aastra AastraLink Pro 160 Administrator's Manual page 42

AastraLink Pro 160 Administrator Guide
Accessing the AastraLink Web UI
AastraLink Web UI
Step Action
4 In the "Forward Number" field, enter a phone number for the phone state you chose in step 3.
If the administrator phone is in the state you specified in step 3, all incoming calls are call forwarded
to the number you specified for that state.
5 Click <Save> to save the setting.
Configuring Find-Me Follow-Me
The Find-Me Follow-Me feature on the administrator phone allows you to specify
other phone numbers that can be used to try to reach you (for example, your work
phone number or your cell phone number), if a caller cannot reach you on the
administrator phone
Find-Me Follow-Me is disabled by default on the administrator phone. You can
enable Find-Me Follow-Me using two different modes:
• Parallel - When an incoming call comes into the administrator phone and
there is no answer, the administrator phone rings both the first preset number
and the second preset number at the same time.
• Sequential - When an incoming call comes into the administrator phone and
there is no answer, the administrator phone rings the first preset number; if no
answer at this number, it then rings the second preset number.
In the "First Preset" and "Second Preset" fields, you can specify whether the
find-me follow-me number is an extension number or another type of number
(PSTN number).
Note: By default, the "First Preset" field is set to "Extension", and the "Second Preset" field is set
to "Other".
In the "First Number" and "Second Number" fields, you can specify the
extension or another type of number (home, work or cell phone number) to use for
the find-me follow-me configuration.
Note: By default, the "First Number" field is set to the administrator's phone extension, and the
"Second Number" field is set to the next sequential User phone extension in the network.
2-16 41-001190-01 Rel. 1.1, Rev. 00