Remote Phone Installation - Aastra AastraLink Pro 160 Administrator's Manual
Linux-based hardware unit
Hide thumbs
Also See for AastraLink Pro 160:
- Administrator's manual (360 pages) ,
- User manual (230 pages) ,
- User's quick start manual (2 pages)
Table of Contents
Advertisement
3. Remote Phone Installation
Pre-stage phone
Press <Remote> when the Auto-Discovery screen is presented in TUI.
Non Pre-stage phone
Press <Remote> and enter the external gateway IP (e.g. 65.215.35.80) and HTTP
port start (e.g. 51510) when TUI prompts.
Upon a successful dialogue with the server and with the pre-configuration or
downloaded configuration, the phone automatically initiates port mapping setups
with Home Router using UPnP.
The following table is the port mapping table after a successful UPnP session with
the phone-side Home Router.
Home Router Port Mapping Table
Action
Name
Allow
Allow
Allow
Allow
Allow
Allow
Allow
Allow
41-001190-01 Rel. 1.1, Rev. 00
Remote Office Configuration of the AastraLink Pro 160 (Server-Side)
Remote Office Configuration of the AastraLink Pro 160
Source
WAN, *
LAN, 192.168.1.3
WAN, *
LAN, 192.168.1.3
WAN, *
LAN, 192.168.1.3
WAN, *
LAN, 192.168.1.3
WAN, *
LAN, 192.168.1.3
WAN, *
LAN, 192.168.1.3
WAN, *
LAN, 192.168.1.3
WAN, *
LAN, 192.168.1.3
Destination
Protocol
UDP, 5060-51620
TCP, 80-51510
UDP, 3000-51720
UDP, 3001-51721
UDP, 3002-51722
UDP, 3003-51723
UDP, 3004-51724
UDP, 3005-51725
B-7
Advertisement
Table of Contents
