AastraLink Pro 160 Administrator Guide
Reinstalling Aastra IP Phones at the Central Site
Step Action
8
Select <Restart> when prompted to restart the phone.
The IP phone reverts back to its factory default settings.
9
Disconnect, then reconnect, your IP phone to your Ethernet Hub/Router.
If your IP phone has been successfully reset to "local mode," it should start up, retrieve its
configuration from the AastraLink, and then prompt you to specify a user name. You can then
continue to register the IP phone as describe in the section
Central Site"
on
page
A-14
A-4.
"Registering IP Phones At the
41-001190-01 Rel. 1.1, Rev. 00