Aastra AastraLink Pro 160 Administrator's Manual page 268

AastraLink Pro 160 Administrator Guide
Remote Office Configuration of the AastraLink Pro 160
AastraLink Pro 160 Remote Office Configuration
Step Action
Install the Remote IP Phone (Pre-Stage Phone)
7 Press <Remote> when remote phone is in the Auto-Discovery screen.
If the phone cannot find a UPnP enabled device, it displays "UPnP device not found". Press <Skip>.
The phone prompts for the NAT IP address.
8 Enter the Home Router WAN-side IP address. For example: 65.96.171.130
The phone prompts for the SIP port.
9 Enter the SIP port for the Home Router. For example, you can enter 51620.
The Phone prompts for an RTP port.
10 Enter the RTP port for the Home Router. For example, you can enter 51720.
The Phone prompts for an HTTPS port.
11 Enter the HTTPS port for Home Router. For example, you can enter 51510.
Install the Remote IP Phone (Non-pre-Stage Phone)
12 Press <Remote> and enter the server external gateway IP address (for example, 65.215.35.80).
The Phone prompts for an HTTP port.
13 Enter the HTTP port start (for example, 51510).
The Phone prompts for a NAT IP address.
14 Enter the Home Router WAN-side IP address.
The phone prompts for the SIP port.
15 Enter the SIP port for the Home Router. For example, you can enter 51620.
The Phone prompts for an RTP port.
B-10 41-001190-01 Rel. 1.1, Rev. 00