Configuring Dial Plan Settings - Aastra AastraLink Pro 160 Administrator's Manual
Linux-based hardware unit
Hide thumbs
Also See for AastraLink Pro 160:
- Administrator's manual (360 pages) ,
- User manual (230 pages) ,
- User's quick start manual (2 pages)
Table of Contents
Advertisement
Configuring Dial Plan Settings
You configure AastraLink Pro 160 dial plan settings from the
Configuration->DialPlan menu shown below
A dial plan describes the number and pattern of digits that a user dials to reach a
particular telephone number. The default dialing plan for the AastraLink Pro 160
is 3-digits, starting with extension 200 (administrator). Users are assigned
extensions 201, 202, etc.
Note: The Administrator can select an alternative 3-digit or 4-digit dialplan and first extension
when initially configuring the system from the administrator phone TUI. This cannot be changed
after the user phones have been added; a factory-default of the system greenfield is required to
change the dialplan.
Figure 4-4.
Dial Plan Menu
41-001190-01 Rel. 1.1, Rev. 00
Configuring AastraLink Pro 160 System and Network Parameters
Configuring Dial Plan Settings
4-31
Advertisement
Table of Contents
