Aastra AastraLink Pro 160 Administrator's Manual page 118
Linux-based hardware unit
Hide thumbs
Also See for AastraLink Pro 160:
- Administrator's manual (360 pages) ,
- User manual (230 pages) ,
- User's quick start manual (2 pages)
Table of Contents
Advertisement
AastraLink Pro 160 Administrator Guide
Configuring Network Settings
AastraLink Web UI
Step
Action
3
To specify a Domain name, enter the name in the "Domain" field.
4
DHCP is enabled by default. To disable it DHCP, click on "Use DHCP" to uncheck the box.
Note: If you disable DHCP, then you must statically configure the following networking parameters:
•
IP Address: Set to a valid IP address.
•
Subnet Mask: Set to a valid Subnet Mask address.
•
Gateway: Set to a valid Gateway IP address.
•
DNS Server 1: Set to the IP address of DNS server 1.
•
DNS Server 2: Set to the IP address of DNS server 2.
5
Click <Save> to save your changes.
Note: You must reboot your AastraLink Pro 160 in order for these network parameter changes to be
implemented.
4-18
41-001190-01 Rel. 1.1, Rev. 00
Advertisement
Table of Contents
