Aastra AastraLink Pro 160 Administrator's Manual page 253

Step Action
4 Specify the HTTP port the IP phone uses to communicate with the AastraLink Pro 160.
For example: 51510
Your Aastra IP phone downloads the latest configuration information from the AastraLink Pro
160 and reboots. When the Idle State Screen appears showing your user name and extension
(like the one below), the registration process is complete.
5 Your Aastra IP phone connects to the IP phone network at the central site and is fully
operational.
Your IP phone only successfully connects to the AastraLink Pro if its MAC address is
pre-provisioned in the Users List at the location User->User List in the administrator menus.
41-001190-01 Rel. 1.1, Rev. 00
Remote Office Configuration of the IP Phone (Phone-Side)
Connecting To The IP Phone Network From a Remote Office
Enter HTTPS port
51510
Backspace
Dot .
abc
201 - B Jones
L1
May 1 10:15 am
DND
Forward ParkCall
Directory
Cancel
Done
Your name
and extension
Vmail
More
A-9