Emergency Services For Virtual Office; Configuring The Branch Office Zone; Nn43001-307 02.02 Standard - Nortel 1000 Configuration Manual

200 Emergency Services configuration
LD 90
Prompt Response
REQ NEW CHG
CUST xx
FEAT NET
TRAN aaa
TYPE SPN
- SPN 911
112
- RLI xxx
Procedure 16
Configuring the branch office zone
Step
1
2
Emergency Services for Virtual Office
The E911 Virtual Office feature allows Virtual Office users, whether they are
logged in or logged out of Virtual Office to place an emergency (E911) call
to the correct Public Safety Answering Point (PSAP) for their geographical
location.
Copyright © 2005-2007, Nortel Networks
.
Description
Add, Change
Customer number as defined in LD 15
Network translation tables
AC + ESDN is recognized as an Emergency Service Access call.
Use the number configured for ESDN.
Route List Index.
Use Route List Index configured in LD 86.
Action
Configure the branch office zone on the branch office.
In the branch office, only the zone number and bandwidth/codec
selection is configured.
Use the same zone number between the branch office and main
office. The main office configuration
main office" (page 195), step 6) provides the branch office zone
characteristics (local time, local dialing, and ESA).
Configure the routing tables on the SRG.
The SRG must recognize the incoming digits on the Virtual Trunk and
remove all but the ESDN. The call is routed to a local termination.
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50

NN43001-307 02.02 Standard

Release 5.0 3 December 2007
—End—
(Procedure 15 "Configuring the
—End—