Parameters
This command has no parameters.
Command Example
Root>
config zoning showPending
Output
The zoning configuration data is displayed as a table that includes the following properties.
Local ZoneSet
The enabled status, name, and member zones of the zone set.
Output Example
The output from the config.zoning.showPending command displays as follows.
Pending Zone Set
Default Zone Enabled:
ZoneSet:
TheNewUltimateZoneSet
Zone:
TheNewUltimateZone
ZoneMember: Domain 10, Port 6
ZoneMember: Domain 15, Port 2
Zone:
TheNewNotSoUltimateZone
ZoneMember: 10:00:00:00:C9:22:9B:AB
ZoneMember: 10:00:00:00:C9:22:9B:C6
ZoneMember: 10:00:00:00:C9:22:9B:AB
Zone:
TheNewNotUltimateAtAllZone
ZoneMember: Domain 2, Port 63
False
config
61