HP Surestore 64 - Director Switch User Manual page 116

Message
Error 63: Undefined Zone Set
Error 64: Duplicate Zone Set
Error 65: Max Zone Sets
Defined
Error 66: Zone Set Name in
Use
Error 67: Invalid Number of
Zone Set Members
Error 68: Zone Set Not
Enabled
Error 69: Duplicate Port Name
Error 70: Invalid Device Type
Error 71: Device Not Installed
Error 72: No Backup FRU
Error 73: Port Not Installed
Error 74: Invalid Number of
Zones
Error 75: Invalid Zone Set Size
Error 76: Invalid Number of
Unique Zone Members
Error 77: Port Failed
Error 78: System Error Light
On
Error 79: Device Failed
Error 81: Default Zone Enabled
Error 82: Invalid Interop Mode
104 Appendix
Cause/Solution
The value entered for the interoperability mode is not valid. The
interoperability mode for the director or switch must be
(McDATA Fabric 1.0) or
mcdata open
or to set the interoperability mode.
open
(Open Fabric 1.0). Enter either
mcdata