Show.security.portbinding - HP Surestore 64 - Director Switch User Manual
Command line interface user's guide
Hide thumbs
Also See for Surestore 64 - Director Switch:
- User manual (296 pages) ,
- Planning manual (172 pages) ,
- Installation manual (148 pages)
Table of Contents
Advertisement
show.security.portBinding
Syntax
portBinding
Purpose
This command shows the port binding configuration for all ports.
Parameters
This command has no parameters.
Command Example
Root>
show security portBinding
Output
The port binding configuration data is displayed as a table that includes the following
properties.
Port
The port number.
WWN Binding
The state of port binding for the specified port (active or inactive).
Bound WWN
The WWN of the device that is bound to the specified port. If this field is
blank, no device is bound to the specified port.
show
93
Advertisement
Table of Contents
