Command Example
Root>
config security userRights administrator "Administrator" "new
password"
config.security.userRights.operator
Syntax
operator "username" "password"
Purpose
This command sets the name and password for operator-level access.
Parameters
This command has two parameters.
username
Specifies the new user name for operator-level login. Default is set to
Operator
characters in the USASCII character set, excluding control characters and
spaces. Spaces are not valid even though quotation marks are used.
password
Specifies the password for operator-level login. Default is set to
This parameter is 1–15 characters. Valid characters include all characters in
the USASCII character set, excluding control characters and spaces. Spaces
are not valid even though quotation marks are used.
Command Example
Root>
config security userRights operator "Operator" "newpassword"
32
config
. This parameter is 1–15 characters. Valid characters include all
password
.