Show.port.status - HP Surestore 64 - Director Switch User Manual

show.port.status

Syntax
status
Purpose
This command displays port status for all ports.
Parameters
This command has no parameters.
Command Example
Root>
show port status
Output
The port status data is displayed as a table that includes the following properties.
Port The port number.
State The port state (for example, Segmented E_Port, Invalid Attachment, Not
Installed, Online, Offline, Not Operational, No Light, Testing, Port Failure, and
Link Reset).
Type The operational port type. If the configured port type is F_Port or E_Port, this
value will match the configured type. If the configured type is G_Port, this
value can be E_Port, F_Port, or G_Port, depending on what is connected to
the port.
Attached WWN The world-wide name of the device or switch attached to the port, if one is
attached.
Beaconing The beaconing state for the port (true or false).
show 89