Command Example
Root>
config snmp show
Output
The switch configuration data is displayed as a table that includes the following properties
commIndex
The community index number.
commName
The name of the community.
writeAuthorization
The write authorization state.
trapRecipient
The address of the trap recipient.
udpPortNum
The UDP port number to which the director will send traps for each recipient.
Output Example
The output from the config.snmp.show command displays as follows.
Authorization Traps: Enabled
Index Community Name
----- -------------------------------- --------- --------------- --------
1
CommunityName1
2
CommunityName2
3
CommunityName3
4
public
5
6
WriteAuth Trap Recipient
Enabled
123.123.123.123 162
Enabled
10.25.25.10
Disabled
132.44.85.224
Enabled
UDP Port
144
162
162
config
37