HP Surestore 64 - Director Switch User Manual page 113

Command line interface user's guide
Hide thumbs Also See for Surestore 64 - Director Switch:
Table of Contents

Advertisement

Message
Error 16: Invalid R_A_TOV
Error 17: Invalid E_D_TOV
Error 18: Invalid TOV
Error 20: Invalid Preferred
Domain ID
Error 21: Invalid Switch Priority The value entered for the switch priority is invalid. The switch
Error 22: Invalid Class 2 VC
Error 23: Invalid Class 3 VC
Error 29: Invalid Gateway
Address
Error 30: Invalid IP Address
Error 31: Invalid Subnet Mask
Cause/Solution
The value entered for the resource allocation time-out value is
invalid. The R_A_TOV is entered in tenths of a second and must
be an integer in the range 10–1200 (1 second to 120 seconds).
The R_A_TOV value must be larger than the E_D_TOV value.
Enter a value in the range 10–1200.
The value entered for the error detect time-out value is invalid.
The E_D_TOV is entered in tenths of a second and must be an
integer in the range 2–600 (0.2 second to 60 seconds). The
E_D_TOV value must be smaller than the R_A_TOV value.
Enter a value in the range 2–600.
The value entered for the time-out value is invalid. Enter a value
in the time-out value range.
The value entered for the preferred domain ID for the director or
switch is invalid. The preferred domain ID must be an integer in
the range 1–31. Enter a value in the range 1–31.
priority entered for the director or switch must be
default
neverprincipal
, or
The value entered for the gateway address is invalid. The new
gateway address for the Ethernet interface must be entered in
dotted decimal format (for example, 0.0.0.0). Enter the gateway
address for your Ethernet interface in the dotted decimal format.
The value entered for the IP address for the director or switch is
invalid. The IP address must be entered in dotted decimal format
(for example, 10.0.0.0). Enter the IP address for the director or
switch in dotted decimal format.
The value entered for the new subnet mask for the Ethernet
interface is invalid. The subnet mask must be entered in dotted
decimal format (for example, 255.0.0.0). Enter the subnet mask
for your Ethernet interface in dotted decimal format.
principal
(see config.switch.priority on p. 41).
Appendix
,
101

Advertisement

Table of Contents
loading

This manual is also suitable for:

Surestore director fc-64

Table of Contents