Config.zoning.deactivatezoneset; Config.zoning.replacezoneset - HP Surestore 64 - Director Switch User Manual
Command line interface user's guide
Hide thumbs
Also See for Surestore 64 - Director Switch:
- User manual (296 pages) ,
- Planning manual (172 pages) ,
- Installation manual (148 pages)
Table of Contents
Advertisement
config.zoning.deactivateZoneSet
Syntax
deactivateZoneSet
Purpose
This command places all attached devices in the default zone and takes effect immediately
fabric wide.
Description
The default zone must be activated independently of this command.
Note
This command takes effect immediately in the fabric.
Parameters
This command has no parameters.
Command Example
Root>
config zoning deactiveZoneSet
config.zoning.replaceZoneSet
Syntax
replaceZoneSet
Purpose
This command replaces the work area with the active zone set that is currently loaded on
the fabric.
52
config
Advertisement
Table of Contents
