Config.system.contact - HP Surestore 64 - Director Switch User Manual

Rerouting Delay The rerouting delay that ensures that frames are delivered in order through
the fabric to their destination. Values are Enabled or Disabled.
Interop Mode Interoperability mode for the switch.
Output Example
The output from the config.switch.show command displays as follows.
BB Credit: 2
R_A_TOV: 20
E_D_TOV: 4
Preferred Domain Id: 1
Switch Priority: Principal
Rerouting Delay: Enabled
Interop Mode: Open Fabric 1.0

config.system.contact

Syntax
contact "systemContact"
Purpose
This command sets the system contact attribute.
Parameters
This command has one parameter.
systemContact Specifies the new system contact string for the director or switch. The contact
can contain 0–255 characters.
Command Example
Root>
config system contact "Joe"
config 45