HP Surestore 64 - Director Switch User Manual page 117

Message
Error 83: Not Legacy Mode
Error 84: Invalid Port PDCM
Error 85: Invalid Code Page
Error 86: Invalid Code Set
Error 87: Invalid GCSGID
Error 88: Invalid Feature Key
Length
Error 89: Operational Mode
S390
Error 90: Invalid Port Type
Error 91: E_Port Type
Configured
Error 92: Port Unblocked
Error 93: S390MS Enabled
Error 94: Invalid Feature
Combination
Error 95: Invalid Switch
Operating Mode
Error 96: Invalid Chassis Serial
Number
Error 97: Invalid E_Port
Capability
Error 98: Chassis Serial
Number Is Zero
Cause/Solution
Zone member cannot be put into the default zone in open mode.
For example, if the following series of commands is entered,
Error 83 results:
Root>
maint system setOnlineState false
Root>
config switch interopMode open
Root>
config zoning setDefZoneState true
Configure the interoperability mode as
series of commands.
mcdata
in the previous
Appendix 105