HP Surestore 64 - Director Switch User Manual page 115

Message
Error 42: Invalid Second
Error 43: Invalid Statistics
Group ID
Error 44: Max SNMP
Communities Defined
Error 45: Switch Online
Error 55: Invalid Zone Name
Error 56: Undefined Zone
Error 57: Duplicate Zone
Error 58: Max Zones Defined
Error 59: Zone Name in Use
Error 60: Invalid Number of
Zone Members
Error 61: Invalid Zone Member
Type
Error 62: Invalid Zone Set
Name
Cause/Solution
The value of the second entered for the new system time is
invalid. The format of the time parameter must be hh:mm:ss. The
second can contain an integer in the range 0–59. Enter an
integer in the range 0–59.
The entered command requires that the director or switch be set
offline. Set the director or switch offline before reentering the
command.
The value entered for the zone name is invalid. The zone name
must contain 1–64 characters. Valid characters are
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuv
wxyz0123456789$-^_ (spaces are not permitted, and the first
character must be alphabetical). Enter a zone name in the range
of 1–64 characters, using the valid characters.
The entered command tried to add more zones than the zone set
allows. Change the size of the zone set, if possible, and then
reenter the command.
The entered command tried to add more zone members than the
zone can hold. Change the number of zone members that the
zone can hold, if possible, and then reenter the command.
The value entered for the zone set name is invalid. The zone set
name must contain 1–64 characters. Valid characters are
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuv
wxyz0123456789$-^_ (spaces are not permitted, and the first
character must be alphabetical). Enter a zone name in the range
of 1–64 characters, using the valid characters.
Appendix 103