Config.port.show - HP Surestore 64 - Director Switch User Manual

Command line interface user's guide
Hide thumbs Also See for Surestore 64 - Director Switch:
Table of Contents

Advertisement

Parameters
This command has two required parameters.
portNumber
Specifies the port number. Valid values are:
0–63 for the FC-64
portType
Specifies the type of the port. Valid values are
Command Example
Root>
config port type 4 fport

config.port.show

Syntax
show portNumber
Purpose
This command displays the port configuration for a single port.
Description
This show command, on the config.port branch, displays the current configuration for the
specified port.
Parameters
This command has one parameter.
portNumber
Specifies the port number. Valid values are:
0–63 for the FC-64
26
config
eport
fport
gport
,
, and
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Surestore director fc-64

Table of Contents