Command Tree - HP Surestore 64 - Director Switch User Manual

Table 1
CLI Command Tree Navigation Conventions (cont'd)
Character Sequence
^A
^B
^D
^E
^F
^H
^I
^K
^L
^N
^P
^R
^U
^X
<ESC>[A
<ESC>[B
<ESC>[C
<ESC>[D

Command Tree

The command tree of the Command Line Interface begins from the root. The commands in
the four extended branches (config, maint, perf, and show) are described in Chapter 2, CLI
Commands.
There are three additional commands (login, logout, and commaDelim) that are globally
available commands. These commands are described in this chapter.
4 Entering Command Line Interface Commands
Common Name
Control-A
Control-B
Control-D
Control-E
Control-F
Control-H
Tab
Control-K
Control-L
Control-N
Control-P
Control-R
Control-U
Control-X
Up Arrow
Down Arrow
Right Arrow
Left Arrow
Action or Description
Position the cursor to the start of the line.
Position the cursor left one character.
Delete the current character.
Position the cursor to the end of the line.
Position the cursor right one character.
Backspace one character and delete the
character.
Complete the current keyword.
Delete to the end of the line.
Redraw the line.
Move down one line in the command history.
Move up one line in the command history.
Redraw the line.
Clear the input and reset the line buffer.
Clear the input and reset the line buffer.
Move up one line in the command history.
Move down one line in the command history.
Position the cursor right one character.
Position the cursor left one character.