Config.switch.show - HP Surestore 64 - Director Switch User Manual

Command Examples
Root>
config switch rerouteDelay true
Root>
config switch rerouteDelay 1

config.switch.show

Syntax
show
Purpose
This command shows the switch configuration.
Parameters
This command has no parameters.
Command Example
Root>
config switch show
Output
The switch configuration data is displayed as a table that includes the following properties.
BB Credit The maximum number of outstanding frames that can be transmitted without
causing a buffer overrun condition at the receiver.
R_A_TOV Resource Allocation Time Out Value.
This value is set in tenths of a second.
E_D_TOV Error Detect Time Out Value.
This value is set in tenths of a second.
Preferred Domain Id The preferred domain ID of the switch.
Switch Priority The switch priority. Values are Principal, Default, or Never Principal.
44 config