Egpas; Additional Egp Objects - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

MIB-II (RFC1213-MIB)
Description
Note:
egpNeighEventTrigger was set to. If it has not been set since the last initialization of the
network management subsystem on the node, it returns a value of stop.
When set, this variable causes a Start or Stop event on the specified neighbor, as
specified in RFC 904. Briefly, a Start event causes an Idle peer to begin neighbor
acquisition and a non-Idle peer to re-initiate neighbor acquisition. A Stop event causes
a non-Idle peer to return to the Idle state until a Start event occurs, either via
egpNeighEventTrigger or otherwise.

Additional EGP Objects

egpAs

Note:
OID
Description
86
A control variable used to trigger operator-initiated Start and
Stop events. Possible values are:
start (1)
stop (2)
When read, this variable always returns the most recent value that
Not Supported.
1.3.6.1.2.1.8.6
The autonomous system number of this EGP entity.
MIB Version 3.1.x/4.1.x Reference Guide