Swfwwriteactvals; Swfwdefaultchangedacts; Swfwdefaultexceededacts; Swfwdefaultbelowacts - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

SW-MIB Objects

swFwWriteActVals

OID
Description
Note:
The following are the custom alarm variables that can be modified:
swFwCustChangedActs
swFwCustExceededActs
swFwCustBelowActs
swFwCustAboveActs
swFwCustInBetweenActs
Changes to these custom alarm variables can be saved by setting this variable to
swFwApplyWrite.
Changes to these custom alarm variables can be removed by setting this variable to
swFwCancelWrite.

swFwDefaultChangedActs

OID
Description

swFwDefaultExceededActs

OID
Description

swFwDefaultBelowActs

OID
Description
250
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.14
This applies or cancels the alarm value changes.
For a read operation, the return value is always swFwCancelWrite.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.15
Default action matrix for changed event.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.16
Default action matrix for an exceeded event. The exceeded value
may be either above the high-threshold or below the
low-threshold.
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.17
Default action matrix for below event.
MIB Version 3.1.x/4.1.x Reference Guide