Swflashdladmstatus; Swflashdlhost - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

swFlashDLAdmStatus

Note:
OID
Description
Note:
StorageWorks Fabric OS Version 3.1.x/4.1.x Reference Guide
configUpload
configDownload

swFlashDLHost

OID
Description
MIB Version 3.1.x/4.1.x Reference Guide
Not supported in v4.x.
1.3.6.1.4.1.1588.2.1.1.1.1.12
The desired state of the Flash.
The host is specified in swFlashDLHost.0. In addition, user
name is specified in swFlashDLUser.0, and the file name
specified in swFlashDLFile.0. Possible values are:
swCurrent (1):
swCfUpload (3):
swCfDownload (4): The switch configuration file is to be
swFwCorrupted (5): The firmware in the Flash is corrupted.
For more information about the following commands, refer to the
1.3.6.1.4.1.1588.2.1.1.1.1.13
The name or IP address (in dot notation) of the host to download
or upload a relevant file to the Flash.
The Flash contains the current
firmware image or configuration file.
The switch configuration file is to be
uploaded to the host specified.
downloaded from the host specified.
This value is for informational
purposes only. However, set of
swFlashDLAdmStatus to this value is
not allowed.
:
SW-MIB Objects
HP
217