HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 313

MIB Version 3.1.x/4.1.x Reference Guide
offlineConnUnitPort:
If the addressed connUnit allows this operation to be
performed to this port, the addressed port performs a
vendor-specific offline operation. Examples of these
operations are:
— Disabling a port's transceiver
— The Link Failure protocol
— Request (NON-PARTICIPATING) command to the
Loop port state machine removal of the port from an
arbitrated loop by a hub
onlineConnUnitPort:
If the addressed connUnit allows this operation to be
performed to this port, the addressed port performs a
vendor-specific online operation. Examples of these
operations are:
— Enabling a port's transceiver.
— The Link Failure protocol, request
(PARTICIPATING) command to the Loop port state
machine.
— Addition of the port from an arbitrated loop by a hub.
Each implementation may choose not to allow any or all of
these values on a SET.
If the Management Station uses in-band communication
(FC-IP) with the switch, either of the two following actions
may result in a loss of in-band communication with the
switch:
Disabling the FC port that is connected to the
Management Station.
Disabling the embedded port.
Fibre Alliance MIB Objects
313