Connunitportname; Connunitportphysicalnumber - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

Fibre Alliance MIB Objects
Note:

connUnitPortName

OID
Description
Note:

connUnitPortPhysicalNumber

OID
Description
Note:
Core Switch 2/64: 0 through
314
Return values are:
resetConnUnitPort
bypassConnUnitPort
unbypassConnUnitPort
offlineConnUnitPort
onlineConnUnitPort
resetConnUnitPortCounters
1.3.6.1.3.94.1.10.1.17
A string describing the addressed port.
This object is read-only for HP switches.
1.3.6.1.3.94.1.10.1.18
This is the internal port number by which this port is known.
In many implementations, this should be the same as
connUnitPortIndex. Some implementations may have an
internal port representation not compatible with the rules for
table indices. In that case, provide the internal representation
of this port in this object. This value may also be used in the
connUnitLinkPortNumberX or connUnitLinkPortNumberY
objects of the connUnitLinkTable.
The internal port numbers for HP switch
- portDisable (F or E_port, loop for U_port)
- portDisable (FL_port)
- portEnable (FL_port)
- portDisable (E, F, FL_port)
- portEnable (U)
- clear the port stats counter. When rebooted, this
defaults to 1 (unknown)
maximum number of ports
MIB Version 3.1.x/4.1.x Reference Guide
.