Connunitportstatobject; Connunitportprotocolcap - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

connUnitPortStatObject

OID
Description
Note:

connUnitPortProtocolCap

Note:
OID
Description
Note:
MIB Version 3.1.x/4.1.x Reference Guide
1.3.6.1.3.94.1.10.1.19
This contains the OID of the first object of the table that
contains the statistics for this particular port. If this has a
value of zero, then there are no statistics available for this
port. The port type information helps identify the statistics
objects that are found in the table. From this point, one would
do a getnext to get the next statistics object. When the first
part of the OID changes, the end of table is reached.
Mapped to connUnitPortStatFabricUnitId.
Not supported in Fabric OS v2.6.1.
1.3.6.1.3.94.1.10.1.20
This is the bit mask that specifies the driver level protocol
capability of this port.
If this is not applicable, return all bits set to zero.
Return value = 07F
The bits have the following definition:
0 = unknown
1 = Loop
2 = Fabric
4 = SCSI
8 = TCP/IP
16 = VI
32 = FICON
Fibre Alliance MIB Objects
315