HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 312

Fibre Alliance MIB Objects
Description
312
Controls the addressed connUnit's port.
Valid commands are:
resetConnUnitPort:
If the addressed connUnit allows this operation to be
performed to this port, the addressed port performs a
vendor-specific reset operation. Examples of these
operations are:
— The Link Reset protocol.
— The Loop Initialization protocol.
— Re-synchronization occurring between the transceiver
in the addressed port to the transceiver that the port is
connected to.
bypassConnUnitPort:
If the addressed connUnit allows this operation to be
performed to this port, the addressed port performs a
vendor-specific bypass operation. Examples of these
operations are:
— Transitioning from online to offline.
— A request (NON-PARTICIPATING) command to the
Loop port state machine.
— Removal of the port from an arbitrated loop by a hub.
unbypassConnUnitPort:
If the addressed connUnit allows this operation to be
performed to this port, the addressed port performs a
vendor-specific unbypass operation. Examples of these
operations are:
— The Link Failure protocol.
— A request (PARTICIPATING) command to the Loop
port state machine.
— Addition of the port to an arbitrated loop by a hub.
MIB Version 3.1.x/4.1.x Reference Guide