Entlogicaltaddress; Entlogicaltdomain - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

entLogicalTAddress

OID
Description

entLogicalTDomain

OID
Description
MIB Version 3.1.x/4.1.x Reference Guide
Logical entities "bridge1" and "repeater1" would be
represented by sysOREntries associated with the default
naming scope.
For agents not accessible via SNMPv1 or SNMPv2C, the
value of this object is the empty string. This object may also
contain an empty string if a community string has not yet been
assigned by the agent, or no community string with suitable
access rights can be returned for a particular SNMP request.
Note that this object is deprecated. Agents that implement
SNMPv3 access should use the entLogicalContextEngineID
and entLogicalContextName objects to identify the context
associated with each logical entity. SNMPv3 agents may
return a zero-length string for this object, or may continue to
return a community string (for example, tri-lingual agent
support).
1.3.6.1.2.1.47.1.2.1.1.5
The transport service address by which the logical entity
receives network management traffic, formatted according to
the corresponding value of entLogicalTDomain.
For snmpUDPDomain, a TAddress is 6 octets long, the initial
4 octets containing the IP-address in network-byte order and
the last 2 containing the UDP port in network-byte order.
Consult Transport Mappings for Version 2 of the Simple
Network Management Protocol (RFC 1906 [RFC1906]) for
further information on snmpUDPDomain.
1.3.6.1.2.1.47.1.2.1.1.6
Indicates the kind of transport service by which the logical
entity receives network management traffic. Possible values
for this object are presently found in the Transport Mappings
for SNMPv2 document (RFC 1906 [RFC1906]).
Entity MIB Objects
181