Swfcportadmstatus; Swfcportlinkstate - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

SW-MIB Objects

swFCPortAdmStatus

OID
Description

swFCPortLinkState

OID
Description
Note:
affected.
234
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5
The desired state of the port. A management station may place
the port in a desired state by setting this object accordingly.
Possible values are:
online (1):
offline (2): No user frames can be passed.
testing (3): No user frames can be passed.
faulty (4):
v3.x:
The 3 (testing) state indicates that no user frames can be
passed. As the result of either explicit management action or
per configuration information accessible by the switch,
swFCPortAdmStatus is then changed to either the 1 (online)
or 3 (testing) states, or remains in the 2 (offline) state.
v4.x:
The 3 (testing) state is not supported.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6
Indicates the link state of the port.
enabled (1):
disabled (2):
loopback (3): The port may transmit frames through an
When the port's link state changes, its operational status (swFCPortOpStatus) is
User frames can be passed.
No user frames can be passed.
The port is allowed to participate in the
FC-PH protocol with its attached port (or
ports if it is in an FC-AL loop).
The port is not allowed to participate in the
FC-PH protocol with its attached ports.
internal path to verify the health of the
transmitter and receiver path.
MIB Version 3.1.x/4.1.x Reference Guide