Fcfxportphysadminstatus; Fcfxportphysoperstatus - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

fcFxPortPhysAdminStatus

OID
Description

fcFxPortPhysOperStatus

OID
Description
MIB Version 3.1.x/4.1.x Reference Guide
1.3.6.1.2.1.75.1.2.2.1.1
The desired state of the FxPort. A management station may
place the FxPort in a desired state by setting this object
accordingly. Possible values are:
online (1): Place port online.
offline (2): Take port offline.
testing (3): Initiate test procedures
The testing (3) state indicates that no operational frames can be
passed. When a Fabric Element initializes, all FxPorts start with
fcFxPortPhysAdminStatus in the offline (2) state. As the result
of either explicit management action or per configuration
information accessible by the Fabric Element,
fcFxPortPhysAdminStatus is then changed to either the online
(1) or testing (3) states, or remains in the offline (2) state.
1.3.6.1.2.1.75.1.2.2.1.2
The current operational status of the FxPort. Possibles values
are:
online (1):
offline (2):
testing (3):
linkFailure (4): Failure after online/testing.
The testing (3) state indicates that no operational frames can be
passed. If fcFxPortPhysAdminStatus is offline (2) then
fcFxPortPhysOperStatus should be offline (2). If
fcFxPortPhysAdminStatus is changed to online (1) then
fcFxPortPhysOperStatus should change to online (1) if the
FxPort is ready to accept Fabric Login request from the attached
NxPort; it should proceed and remain in the linkFailure (4) state
if and only if there is a fault that prevents it from going to the
online (1) state.
Login may proceed.
Login cannot proceed.
Port is under test.
FE MIB Objects
113