Ifspeed; Ifphysaddress - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

Hp storageworks mib v3.1.x/4.1.x reference guide (aa-ru58a-te, june 2003)
Hide thumbs Also See for StorageWorks MSA 2/8 - SAN Switch:
Table of Contents

Advertisement

MIB-II (RFC1213-MIB)
Note:
of the largest network datagram that can be sent on the interface (these values are
different for Fabric OS v4.x).
fei0 returns 1500.
lo0 returns 3904.
fc0 returns 2024.

ifSpeed

OID
Description
Note:
estimation can be made, this object should contain the nominal bandwidth. For Fabric
OS v4.x, 2 GB returns.
fei0 returns 10
lo0 returns 0.
fc0 returns 10

ifPhysAddress

OID
Description
50
For interfaces that are used to transmit network datagrams, the value is the size
1.3.6.1.2.1.2.2.1.5
An estimate (in bits per second) of the interface's current
bandwidth.
For interfaces that do not vary in bandwidth or interfaces for which no accurate
7
.
9
.
1.3.6.1.2.1.2.2.1.6
The interface's address at the protocol layer immediately
below the network layer in the protocol stack.
MIB Version 3.1.x/4.1.x Reference Guide

Advertisement

Table of Contents
loading

Table of Contents