Swtelnetshelladmstatus; Swssn; Flash Administration - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

swTelnetShellAdmStatus

Note:
OID
Description
Note:
this variable instance is read, it reports the value last set through SNMP.
V4.0: Not Supported.

swSsn

OID
Description
Note:

Flash Administration

The next six objects are related to firmware or configuration file management. The
underlying method in the transfer of the firmware or configuration file is based on
either FTP or remote shell. If a password is provided, then FTP is used. If NO
password is provided, then remote shell is used.
Use one of the two following methods to manage the firmware or switch
configuration file in the switch Flash:
MIB Version 3.1.x/4.1.x Reference Guide
Applicable to HP Fabric OS v2.x and v3.x only (not supported in v4.x).
1.3.6.1.4.1.1588.2.1.1.1.1.9
The desired administrative status of the telnet shell. Possible
values are:
unknown (0): The status of the current telnet shell task is
terminated (1):The current telnet shell task is deleted.
V3.0: By setting it to 1 (terminated), the current telnet shell task is deleted. When
1.3.6.1.4.1.1588.2.1.1.1.1.10
The soft serial number of the switch.
By default, the return value is the WWN of the switch.
unknown.
SW-MIB Objects
215