Connunitporthwstate; Connuniteventtable; Connunitevententry; Connectivity Unit Event Table - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

Fibre Alliance MIB Objects

connUnitPortHWState

Note:
OID
Description

Connectivity Unit Event Table

connUnitEventTable

OID
Description
Note:
(v4.0 only) This table contains the 255 most-recent event log entries.

connUnitEventEntry

OID
Description
318
Not supported in Fabric OS v2.6.1.
1.3.6.1.3.94.1.10.1.23
The state of the port as detected by the hardware. Possible
values are:
unknown (1)
failed (2):
bypassed (3): FCAL bypass, loop only (not used).
active (4):
loopback (5): Port in ext loopback (loopback state).
txfault (6):
noMedia (7):
linkDown (8): Waiting for activity—rx sync (light with
1.3.6.1.3.94.1.11
The table of connectivity unit events. Errors, warnings, and
information should be reported in this table.
(v3.0 only) This table contains the 64 most-recent event log entries.
1.3.6.1.3.94.1.11.1
Each entry contains information on a specific event for the
given connectivity unit.
Port failed diagnostics (port_flt_state).
Connected to a device (light and sync are
present).
Transmitter fault (bad GBIC).
Media not installed (GBIC removed).
no sync).
MIB Version 3.1.x/4.1.x Reference Guide