JVC RX-8040B Instructions Manual page 62

To change the transmittable signals for
operating another manufacturer's CATV
converter or DBS tuner
1. Set the TV operation mode
selector to CATV/DBS.
2. Press and hold
TV/CATV/DBS POWER.
3. Press TV/DBS.
4. Enter a manufacturer's code
using buttons 1-9, and 0.
See page 62 to find tile code.
5. Release
TV/CATV/DBS POWER.
6. Try to operate your CATV
converter or DES tuner by
pressing
TV/CATV/DBS POWER.
When your CATV converter or DES
tuner turns on or oft', you have entered
flae correct code.
If more than one code is listed for
your brand of CATV converter or
DES tuner, try each one until the
correct one is entered,
CD CD CD CD
CTDCZDCD CD
o®_
CD CID CD CD
<;_ [C>
c>ol!
ci@E
C 0
2@2
Note:
You cannot preset the signals for both the CATV convertor and
DES tuner at the same time.
After setting the TV operation mode selector to CATV/DBS,
you call turn oil and off tile CATV converter or DES tuner:
TV/CATV/DBS POWER: Turn on or off the CATV converter
or DES tuner.
After pressing TV/DBS (with the TV operation mode selector
set to CATV/DBS), you call perform the following operations on
the CATV converter or DES ttmer:
CHANNEL +/-
1 -9, 0, 100+ (+10)
10 (RETURN)
Notes:
: Change the channels.
: Select the channels.
: Function as ENTER if your
equipment requires pressing ENTER
after selecting a channel number.
• Refer to the manual supplied for the CATV converter or DES
tunelt
• Some buttons listed above may not be used for some CATV
converters or DBS tuners.
• If you cannot change the channels of some CATV converters or
DBS tuners by pressing number buttons, press the
CHANNEL +/- buttons
To change the transmittable signals for
operating another manufacturer's VCR
1. Press and hold DVD POWER.
2. Press VCR 1. O CD C_
3. Enter a manufacturer's code
using buttons 1-9, and 0. CD CD CD CD
See page 62 to find the code. O O O
CD CD CD (ZD
4. Release DVD POWER.
5. Try to operate your VCR 1 by
pressing one of the below
i CSD CD CD CD
bnttons. CD CD ,
When },our VCR 1 have operated o_ CD
correctly, you have entered tile correct _ _
code. _ _
• DO NOT forget to turn on the VCR 1
before pressing one of the below
buttons.
If more than one code is listed for your
hrand of VCR, try each one until the
correct one
iS
entered.
After pressing VCR 1, you call perform
the following operations on the VCR 1:
PLAY Start playing.
REW Rewind tile tape.
FF
Fast-forward tile tape.
STOP Stop playing and recording or rewind or
fast-forward the tape.
PAUSE Pause playing or recording. To resmne, press
PLAY.
• REC Press this button together with PLAY to start
recording (only for Zone 1 operations).
Press this button together with PAUSE to
enter recording pause (only for Zone 1
operations).
CHANNEL +/- Change the TV channels on the VCR 1.
1 - 9, 0,100+ (+10)
: Select tile TV channels on the VCR 1.
10 (RETURN) : Flmction as ENTER if your VCR 1 requires
pressing ENTER after selecting a channel
nUlllber.
Notes:
• Refer to the manual supplied for the VCR.
• Some buttons listed above may not be used for some VCRs.
• If you cannot change the channels of some VCRs by pressing
number buttons, press the CHANNEL +/- buttons
60