JVC RX-8040B Instructions Manual page 20

l:_[m_j __l_l'_ F"-':
The sources and functions available for Zone 2 operations
are limited.
For more details oil Zone 2 operations, see "Zone 2 (Sub-room)
Operations" oil pages 26 to 29.
On the front panel:
L_
1. Press _/) STANDBY/ON.
The STANDBY lamp goes off. and the ZONE I indicator lights
up oil the display.
The buttons and controls on the unit work for Zone I operations.
2. Press ZONE 2 ON/OFF to activate ZONE 2.
Tire ZONE 2 indicator lights up.
• For more details, see "Turning the Power On and Off (Standby)
and Selecting the Zone 2 Operations" oil page 26.
3. Press ZONE 2 CONTROL so that "ZONE2" and
the previously selected Zone 2 source name
appear on the display.
Now the buttons and controls on tire unit work for Zone 2
operations.
"ZONE2" appears.
I
..,." i .'..l .'... ".:
m:=, :,=: i "ii,,., .m:.,
r'.: i i r":
The last Zone 2 source appears.
i_-i I
The Zone 2 volume
level appears.
4. Press one of the source selection buttons (except
DVD MULTI) to select a source and start
playback.
Tire sound comes out of the Zone 2 front speakers.
• For more details, see "Selecting the Zone 2 Source to Play" on
page 28.
• If no sound comes out of the Zone 2 front speakers, see
"Activating the Zone 2 Front Speakers" oil page 29.
Note:
When "TV'has been assigned as the source to the
TV SOUND/DBS button, it does not work. To change the source
name, see "Changing the Source Name" on page 24.
5. Turn MASTER VOLUME to adjust the volume
level of the sound through the Zone 2 front
speakers.
• For more details, see "Adjusting the Zone 2 Volmne" oil page
28.
On the remote centre#
When operating the receiver using the remote control, the unit's
display always shows the Zone 1 source information though you
are operating it for the Zone 2 source.
i .................................
_I
.
.
.
.
Set ZONE I/ZONE 2 selector to ZONE 2.
Now the buttons oil tire remote control work for Zone 2
operations.
Press AUDIO POWER ON.
The STANDBY lamp on the from panel goes off, and the
ZONE 2 indicator lights up oil the unit's display.
Press one of the source selection buttons (except
DVD MULTI) to select and play a source.
The sound comes out of ttle Zone 2 from speakers.
• For more details, see "Selecting the Zone 2 Source to Play" oil
page 28.
• If no sound comes out of the Zone 2 front speakers, see
"Activating the Zone 2 From Speakers" on page 29.
Note:
When "TV" has been assigned as the source to the TV/DBS
button, it does not work. To change the source name, see
"Changing the Source Name" on page 24.
Press VOLUME +/- to adjust the vohmme level of
the sound through the Zone 2 front speakers.
• For more details, see "Adjusting tire Zone 2 Volume" on page
28.
18