JVC RX-8040B Instructions Manual page 30

o '
2 7 _"]_T"T " 7 _" fT"l
I _====.J
Press one of the source selection buttons (except DVD MULTI
and TV SOUND).
Ex. When DVD is selected as the source.
•-,'I .-,,. : : :-,- .m 1
,," i ir,,ii-, ,,"
I
VOLUME
r'., i i r'., _ l i-
' :!) I
Selected source name The Zone 2 volume
level appears.
[] [] [] [] [] [] [] [] [] [] []
On the front panel
• The lamp oil the selected source lights up (ex, wheu DVD is
selected as the source).
S
On the front panel:
To increase the volume, turn MASTER VOLUME clockwise.
To decrease the volume, turn it counterclockwise.
On the remote control:
To increase the volume, press VOLUME +.
To decrease the volume, press VOLUME
Note:
The volume level can be adjusted within the range of "0" (minimum) to
"70" (maximum).
CAUTIONS:
• Always set the volume to the minimum before starting any source. If
the volume is set at a high level, the sudden blast of sound energy
can permanently damage your hearing and/or ruin your speakers.
• Be careful not to turn up the volume too high when controlling the
receiver without listening to the playback sound. For example, when
adjusting the volume level in Zone 2 from Zone 1.
On the remote
Notes:
• When connecting an MD recorder (to the TAPE/MD IN jacks), and a
DBS tuner (to the TV SOUND/DBS IN jacks), change the source
names shown on the display. For details, see "Changing the Source
Name" on page 24.
• When you press one of the audio source selection buttons
(PHONO, CD, TAPE/MD, CDR, FM crAM) on the remote control,
the receiver automatically turns on. If you turn on the receiver with
the ZONE !/ZONE 2 selector set to ZONE !, press
ZONE 2 ON/OFF to activate Zone 2 operations.
- While Zone 2 is deactivated, press one of the audio source
selection buttons on the remote control with the ZONE !/ZONE 2
selector set to ZONE 2 to activate Zone 2 operations.
• You cannot select the following as a Zone 2 source:
- "TV SOUND" and "DVD MULTI"
- Any digital input
You can only select the analog input as the Zone 2 source. (If
analog connections have not been made, no sound comes out of
the Zone 2 speakers.)
28