Using With The Alkaline Battery; Inserting A Minidisc - Sharp MD-MT290H Operation Manual

Using with the Alkaline Battery

Use one commercially available alkaline battery (LR6,
"AA" size).
Disconnect the AC adaptor.
1 2 3
1
Push and slide the battery cover.
2
Open the battery cover.

Inserting a MiniDisc

2
4
1
When you record on a MiniDisc,
check that the erase prevention tab
Recordable Recording
is set to the "Recordable" position.
prevented
1
Slide the OPEN lever to release the com-
partment door.
3
Insert an alkaline battery according to the
direction indicated in the battery compart-
ment.
When inserting or removing the battery, push it to-
wards the battery terminal.
4
4
Close the battery cover.
Notes:
Do not replace the battery during operation.
Do not use a nickel-cadmium battery.
Remove the battery if the unit will not be used for long
periods of time. This will prevent potential damage
due to battery leakage.
Installing the battery incorrectly may cause the unit to
malfunction.
2
Lift up the compartment door.
3
Insert a MiniDisc.
Insert according to the direction arrow.
4
3
Close the compartment door.
Notes:
Do not place the MiniDisc under the holder.
If any resistance is felt, do not force the MiniDisc into
the unit, as it may cause damage to the unit. If resist-
ance is felt, remove the MiniDisc and reload it.
The lid cannot be opened if "TOC" is displayed; refer
to the instruction on page 15.
02/12/18
MD-MT290H
11
MD_MT290H_UK_2.fm
6
5
4
3
2
1