Sharp MD-MT290H Operation Manual page 25

! To start recording from the middle of a
track
You can erase a portion of a track and make a new
recording.
All of the tracks that follow the newly recorded track will
be erased.
1
During playback, press the button at the
point where you want to begin recording.
2
Press the REC button.
To cancel the operation, press the :OFF/HOLD but-
ton.
3
Press the MENU/ENTER button.
All of the tracks and track names will be erased, fol-
lowing the point where the playback is paused.
4
Press the MENU/ENTER button again.
5
Press the or button repeatedly to se-
lect "REC MODE".
6
Press the MENU/ENTER button.
7
Press the or button repeatedly to se-
lect the recording mode (step 4, page 22).
8
Press the button.
Recording will start.
Notes:
" Complete the operation within 7 seconds whilst select-
ing the menus.
" To keep a track after the point you want to make a new
recording, move the track and then make recording
after that point. (See "Editing a Recorded MiniDisc",
page 40.)
02/12/18 MD_MT290H_UK_4.fm
MD-MT290H
6
5
4
3
2
1
25