Using With The Rechargeable Battery - Sharp MD-MT290H Operation Manual

Using with the Rechargeable Battery

1 2
3 4
To the DC IN 5V socket
Charging the rechargeable battery
When the rechargeable battery is used for the first time
or when you want to use it after a long period of disuse,
be sure to charge it fully.
1
Insert the rechargeable battery according
to the direction indicated in the battery
compartment.
A rechargeable battery other than the one supplied
or the optional one AD-N70BT cannot be charged.
2
Plug the AC adaptor into the wall socket,
and then insert the plug on the other end
into the DC IN 5V socket.
3
Press the CHARGE button.
The battery indicator will scroll, and battery will begin
charging.
AC 230V,
50/60 Hz
Scrolling
After the rechargeable battery is charged or used, it
will get slightly warm. This is normal.
When the portable MD is turned on or operating, the
battery will not be charged.
For information about the battery life, see the battery
item in the "Specifications" on page 49.
02/12/18
MD-MT290H
9
MD_MT290H_UK_2.fm
6
5
4
3
2
1