Hold Function - Sharp MD-MT290H Operation Manual

Hold Function

MD-MT290H
To prevent accidental operation, the unit can be locked in
its present condition using the Hold function. When in
Hold, no buttons are active.
Main unit
Press the HOLD button for 2 seconds or more.
Hold
If the battery is inserted or the AC adaptor is connected,
you can set this function even when the power is turned
off.
To cancel the hold mode
Press and hold down the HOLD button for 2 seconds or
more whilst the unit is in the hold mode.
"HOLD OFF" will be shown.
14
Remote control unit
Move the HOLD switch to the safety position (direc-
tion indicated by the arrow).
To cancel the hold mode
Move the HOLD switch away from the safety position
(the opposite direction of the arrow).
Release
If the hold function is active whilst the power is turned
off, the power cannot be turned on by mistake and the
battery will not be drained.
02/12/18
Orange mark
Hold
MD_MT290H_UK_2.fm