Using With The Ac Adaptor; Using With The Alkaline Battery - Sharp MD-MT877H Operation Manual

Using with the AC Adaptor

Operation
mode
To the DC IN
5V socket
1
Place the portable MD to the battery charger.
2
Move the Charge/Operation switch to opera-
tion mode.
3
Plug the AC adaptor.
Caution:
If the Charge/Operation switch is not set to operation
mode, no operation is possible.
(See "How to use the Charge/Operation switch", page 8)
When the unit is not in use for extended periods, remove
the AC adaptor from the wall socket.
Insert the plugs firmly.
Note:
When power failure occurs whilst playing back using the AC adap-
tor, disconnect the adaptor from the wall socket. Otherwise, play-
back may start automatically when the power returns.
E-11

Using with the Alkaline Battery

Open
AC 220-230V
2
50/60Hz
1
Press
Use one commercially available alkaline battery (LR6, "AA"
size).
When using the alkaline batteries, make sure the recharge-
able battery is inserted.
1
Open the case cover.
2
Insert a alkaline battery into the battery
case.
3
Attach the battery case to the portable MD.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery
etc.) in the battery case.
Back of the
portable MD
RELEASE LOCK